What is equalisation (EQ)?
Checked against the product on October 22, 2026
Equalisation, or EQ, adjusts how loud the low, middle and high parts of a sound are. For a voice, small changes can reduce a muddy or boomy tone or add clarity, but heavy changes make speech sound unnatural. Fix the microphone position and the room first, use gentle moves and check the sound on a phone speaker.
Definition
Every sound is a mix of pitches. An equaliser lets you turn certain ranges up or down, like treble and bass controls with more precision. On speech, low rumble, boxy mid tones and harsh high tones are the usual suspects.
Common gentle fixes
Small, careful moves almost always sound better than large ones.
| Problem | Range involved | Gentle move |
|---|---|---|
| Boomy or muddy voice | Low range | Reduce a little |
| Rumble from handling or traffic | Very low range | Cut below the voice |
| Dull, unclear voice | Upper-mid range | Raise slightly |
| Harsh or sharp 's' sounds | High range | Reduce a little |
How to use EQ gently
- Fix the recording firstPosition and room beat EQ.
- Listen for one clear problemNot several at once.
- Make a small changeA few decibels at most.
- Compare with and withoutSwitch it off to check.
- Listen on a phone speakerAnd with headphones.
- Save the setting for the same voiceReuse it.
- Do not overdo itNatural beats polished.
Common misunderstandings
- That EQ can fix any bad recording.
- That more boost means more clarity.
- That the same setting suits every voice.
- That it removes background noise.
- That it is necessary for every clip.
How Averoai.pro relates
Averoai.pro finds, reframes and captions clips and does not do audio mastering. If a voice sounds boomy or harsh, adjust it in your editing tool, and keep clean audio in mind when you record, because the transcript is more accurate when speech is clear.
A worked example
A creator recorded in a small room and found the voice boomy. A small cut in the low range and a slight lift in the upper-mid range made the speech clearer, and the creator reused the setting on the same microphone.
Worth remembering
EQ is a gentle tool for small improvements, not a rescue. Fix position and room first, change one thing slightly and compare. Keep a tested setting for each voice and microphone, and revisit it if the room or the equipment changes, since a setting that suited one setup may not suit another. A short note beside the file saying which microphone and room it was made for saves guesswork months later.
Frequently asked questions
What does EQ do?
It adjusts how loud different pitches are.
Can it fix a bad recording?
Not really; improve the recording first.
How much should I change?
A little; heavy changes sound unnatural.
Does Averoai.pro apply EQ?
No; do it in your editing tool.
Features that help with this
Related reading
- What is rendering and exporting?
Rendering builds the final pictures and sound; exporting saves them as a file. Learn the difference, what slows it down and what to check before you upload.
- What is engagement bait?
Engagement bait pushes viewers to like, comment or share with no real reason. Learn what it is, why viewers tire of it and what to do instead.
- What is audio sample rate?
Sample rate is how many times per second audio is measured when it is recorded. Learn what common values mean, why mismatches cause problems and what to check.
- What is a de-esser?
A de-esser softens sharp s and sh sounds in a voice. Learn what causes them, how a de-esser works and why light settings sound most natural.
- What is a pop filter?
Plosives are bursts of air on p and b sounds that make recordings thump. Learn what a pop filter does, other fixes and how it affects clear captions.
- What is a noise gate?
A noise gate mutes audio when it falls below a level so hiss and room noise disappear between words. Learn how it works, its risks and sensible settings.
Also available in Français