Black bars on a vertical video: how to fill the screen
Checked against the product on October 22, 2026
Bars above and below a clip mean a wide picture was fitted inside a tall frame instead of being reframed. To fill the screen you must crop a vertical window out of the wide picture, ideally one that follows the speaker, or accept bars and make them deliberate. Check the aspect ratio of your export first.
Why bars appear
Platforms do not stretch video to fit. If you upload 16:9 to a vertical feed, the picture is shown at full width and the leftover height is filled with bars, which makes it a thin strip in the middle of the screen. The same happens when an export is accidentally set to a wide size.
Check these first
- The export aspect ratio: is it 9:16, 1080 by 1920?
- Whether a reframe or crop was actually applied to the clip.
- Whether the source has bars baked into it, as when screen-recording a video that was already letterboxed.
- Whether the tool's settings switch from fill to fit.
How to fix it
- Set the output to 9:16Choose vertical 1080 by 1920 for the export.
- Reframe instead of fittingCrop a vertical window of the wide picture so it fills the frame.
- Follow the subjectUse a crop that moves with the speaker, so you do not lose them.
- Remove baked-in bars firstIf the source already has black bars, crop them off before reframing.
- Choose fill, not fitWhere the option exists, select the setting that fills the frame.
- Preview on a phoneThe picture should fill the screen without bars.
When bars are acceptable
For a chart, a wide group shot or a screen recording where the edges matter, bars or a blurred background can be the right trade. Make them look intentional: a clean background, a title and captions placed in the empty space inside the safe area.
In Averoai.pro
Averoai.pro reframes recordings to vertical and other formats so that the output fills the frame, with a window that follows the speaker. If a clip comes out with bars, check the chosen format and the framing mode, and look at the exported file on a phone.
Frequently asked questions
Why does my clip have bars on Shorts?
It was probably uploaded as a wide video rather than reframed to 9:16, so the platform fits it inside the tall frame.
Can I fill the bars with blur?
Yes, but the main picture stays small. Reframing usually reads better.
What if the source already has black bars?
Crop them off first, then reframe the real picture.
Do bars hurt performance?
Nothing is guaranteed, but a small picture makes captions and faces harder to see on a phone.
Features that help with this
Related reading
- Vertical clip looks blurry or soft: causes and fixes
A clip that looks sharp wide can look soft once cropped to vertical. See the usual causes, from heavy cropping to low bitrate, and how to improve them.
- The AI picked the wrong moments: how to steer it and choose better
If the proposed clips are not the ones you wanted, the cause is often the source, the window or the brief. See how to get closer to what you had in mind.
- Face cut off in a vertical crop: how to keep speakers in frame
When a 16:9 video is cropped to 9:16, faces can end up at the edge or cut in half. See why and how to correct the framing of a vertical clip.
- Captions hidden behind buttons, text or the edge of the screen
When captions sit under the description or buttons they become unreadable. See how to reposition them in vertical clips and test before you post.
- Safe zones for captions on vertical video platforms
Every platform draws buttons and text over a vertical video. Learn how to find each interface's safe zone and place captions so nothing is hidden.
- One long video, clips for several platforms: a workflow
Make one set of clips and adapt it to each network: same moments, different framing, captions, text and timing, without posting identical copies everywhere.
Also available in Français